产品详情

您的位置:首页 >> 千亿体育在线(中国)有限公司 >> PU30E-ZTL鞋底成型机

PU30E-ZTL鞋底成型机

关注次数:       发布时间:16-04-24
PU30E-ZTL鞋底成型机

PU30E-ZTS鞋底成型机——可加多色
sole forming machine-multiple colors can be added
性能特点FEATURES
PU30E-ZTS浇注机能使反应的PU组分和色原体完全混合,可以达到你想要的最时髦效果;不但操作工艺简单,而且成本也能再次减少,加色或配色过程处理单,能创造更多从未见过的新效果。比如凉鞋、拖鞋、鞋垫、劳保鞋、连帮鞋等等。PU30E-ZTS浇注机在PU鞋底上的加色系统有着十分广泛的应用范围,并添补国内在这一领域的空白。

PU30E-ZTS casting machine can make pu component and chromogen mixed completely to realize the most fashion able effect that you desire. In addition to the simple operation technology, the cost can also be reduced, the process of color adding or preparing is very simple, with more new effects created, for exam, sandals, slippers, shoe pads, labor insurance shoes, and upper joint shoes etc. PU30E-ZTS casting machine has been widely used for color adding system on PU soles, and has filled the domestic blank in this field.

PU30E-ZTS可以同时浇注双密度PU发泡鞋底制品;也可以同时浇注任意单色或配色的双密度PU发泡鞋底
PU30E-ZTS can cast double density PU foam soles simultaneously and can also cast any single color prepared color PU foam soles of double density simultaneously.

PU30E-ZTS可以选配以下周边设备:
混合机头升降装置
原液自动加料装置
原液罐根据客户要求定制80L-350L
环行生产流水线,工位数50-108,亦可依客户定制

PU30E-ZTS can be equipped with the following peripheral equipment:
Mixer head lifting gear
Concentrate auto feeding unit
Concentrate tank can be custom-made 80L-350L
Circular production line, number of work station 50-108, also can be custom-made

·结构
聚氨酯鞋底成型机主要由电路器控制系统、混合机头、原液料罐、加色料罐、原液计量泵组、料温、转速、压力控制系统、清洗系统。气冲系统和机箱等组成。
·特点
1、混合机头采用耐磨,高精度转阀装置,注料同步,工作寿命长,操作简单,安全可靠,维护方便。
2、控制系统采用PLC微机控制,温度,压力,转速由触摸屏显示,直观、方便,并设有超温、超压保护装置。
3、采用低转速高精度计量泵,转速由变频器和PLC控制泵电机,计量精确,计量误差≤1%;
4、采用螺旋和叶片组合式混合装置,搅拌转速n-7600r/min,使料液搅拌均匀,出料流畅,制品致密,有较好弹性。
5、采用冷却装置,连续工作时间长,减少混合头清洗次数,减轻环境污染,降低生产成本,提高制品竞争力。
6、加色或配色系统采用可靠的伺服变量加色,调节方便快捷,运行稳定,操作方便。
7、原液罐采用耐酸不锈钢(内胆)加热(或冷却)夹层式的料罐,夹层内附有管式电加热器,并设有料管内防湿干燥杯,确保原料品质、温度稳定。

·Structure
PU sole molded machine mainly consists of electric control system, mixing head, concentrate feeding tank, additive feeding tank, concentrate meter pump unit, feeding temp, rotary speed, pressure control system, cleaning system, air-let system and rack, etc.
·Characteristics
1. The mixer head is used rotary valve unit with anti-abrasion, high-precision, also with synchronous feeding, long service life, it is easy to handle, meanwhile, safe and reliable, convenient to maintain.
2. The control system is used the PLC PC control, with temp, pressure and rotary speed shown on the touch screen, visual and simple, also there is no overhead and overpressure protection device.
3. Applied the high-precision low-speed meter pump, with rotary speed controlled by the frequency converter and the PLC control pump motor, accurate to meter; meter error-1%;
4. Used the screw & blade combined device, with stirring speed n-7600 r/min, to ensure the feed liquid evenly stirred and discharged smoothly, also with the high precision and a good elasticity.
5. Used the cooling device, it has a long continuous service time, which can reduce the cleaning times of mixing head, reduce pollution, reduce coat and develop the quality.
6. The additive / matching system can be used the reliable servo variable for additive, simple to adjust, stable to run and convenient to operate.
7. The concentrate tank Is applied the feeding tank with anti-add SS (liner) with heating Inter-layer, where there Is a tubular electric heater attached Inside, also there Is a dry measuring cup set inside the feeding tank to ensure a stable quality and temp.
 


 

 

相关产品

快速导航

  • 千亿体育在线(中国)有限公司
  • 在线留言
  • 营销网络